Voltage Protection Relay Work System

Oct 13, 2025 by thesweetdesigns.com 106 views

Internet Voltage-Based Voltage Protection Design (IoT) Using ESP32: A Comprehensive Guide

Introduction

The Internet of Things (IoT) has revolutionized the way we live and work, and its applications in the field of electrical engineering are no exception. One of the most critical aspects of electrical engineering is voltage protection, which ensures the stability and safety of the electricity system. In this article, we will discuss the design of an IoT-based voltage protection relay using the ESP32 module, which offers innovative solutions in maintaining the stability of the electricity system.

Voltage Protection Relay Work System

The voltage protection relay utilizes the ESP32 module as the main microcontroller for data processing and communication with the Blynk application on mobile and Arduino Promini. Arduino is used to read the phase and voltage sequence data from the ZMPT101B sensor. After the data is processed, ESP32 will send the trip command to the release control module if certain conditions are met. In other words, if there is an excess condition or voltage deficiency, this system will automatically cut off electricity to prevent damage to the equipment.

The system works as follows:

The ESP32 module reads the input voltage from the ZMPT101B sensor and compares it with the regulated voltage.
If the input voltage is within the specified limit, the relay remains active, and the electricity continues to the load.
If the input voltage exceeds the specified limit, the ESP32 module sends a trip command to the release control module, which cuts off the electricity to prevent damage to the equipment.

Features and Ease of Settings

One of the advantages of this design is its ability to set up through the TFT LCD screen or through the BLYNK application on mobile phones. Users can adjust the voltage limits, delay time, and the percentage of voltage imbalance easily and quickly. In addition, users can also monitor the voltage between phases, phase-netral voltage, and graph of the voltage reading in real time.

The features of this design include:

Easy setup through TFT LCD screen or BLYNK application on mobile phones
Adjustable voltage limits, delay time, and percentage of voltage imbalance
Real-time monitoring of voltage between phases, phase-netral voltage, and graph of voltage reading
High accuracy and tolerance in voltage measurement

Accuracy and Tolerance

In this relay design, the reading tolerance reaches ± 5% in accordance with the practice of IEEE recommendations for monitoring the quality of electrical energy. Data shows that the error rate in the delay is 3.62%. This shows that although there is a possibility of error in measurement, this system can still function properly and provide the protection needed in various electricity situations.

The accuracy and tolerance of this design are as follows:

Reading tolerance: ± 5%
Error rate in delay: 3.62%
Compliance with IEEE recommendations for monitoring the quality of electrical energy

Conclusion

The IoT-based voltage protection relay designed using ESP32 offers solutions that are not only effective in protection of unstable voltage, but also make it easier for users to supervise and arrange. With easy access through mobile applications, users can quickly respond to emergency situations that occur. This design has the potential to be a very valuable tool in maintaining the safety and stability of electricity networks in various industrial and domestic applications.

Future Scope

The future scope of this design includes:

Integration with other IoT devices to create a smart grid system
Development of a more advanced algorithm for voltage protection
Implementation of this design in various industrial and domestic applications

Limitations

The limitations of this design include:

Limited accuracy and tolerance in voltage measurement
Dependence on the quality of the ZMPT101B sensor
Limited scalability to large-scale applications

Recommendations

Based on the results of this study, the following recommendations are made:

Further research is needed to improve the accuracy and tolerance of the voltage measurement
The use of more advanced algorithms for voltage protection is recommended
The implementation of this design in various industrial and domestic applications is recommended

Conclusion

In conclusion, the IoT-based voltage protection relay designed using ESP32 offers innovative solutions in maintaining the stability of the electricity system. With its ease of setup, high accuracy and tolerance, and real-time monitoring capabilities, this design has the potential to be a valuable tool in maintaining the safety and stability of electricity networks in various industrial and domestic applications.
Internet Voltage-Based Voltage Protection Design (IoT) Using ESP32: Q&A

Introduction

In our previous article, we discussed the design of an IoT-based voltage protection relay using the ESP32 module. This article provides a Q&A section to address any questions or concerns that readers may have regarding the design and implementation of this system.

Q: What is the purpose of the IoT-based voltage protection relay?

A: The purpose of the IoT-based voltage protection relay is to provide a solution for maintaining the stability of the electricity system by protecting against unstable voltage conditions.

Q: How does the IoT-based voltage protection relay work?

A: The IoT-based voltage protection relay works by reading the input voltage from the ZMPT101B sensor and comparing it with the regulated voltage. If the input voltage exceeds the specified limit, the ESP32 module sends a trip command to the release control module, which cuts off the electricity to prevent damage to the equipment.

Q: What are the advantages of using the IoT-based voltage protection relay?

A: The advantages of using the IoT-based voltage protection relay include:

Easy setup through TFT LCD screen or BLYNK application on mobile phones
Adjustable voltage limits, delay time, and percentage of voltage imbalance
Real-time monitoring of voltage between phases, phase-netral voltage, and graph of voltage reading
High accuracy and tolerance in voltage measurement

Q: What are the limitations of the IoT-based voltage protection relay?

A: The limitations of the IoT-based voltage protection relay include:

Limited accuracy and tolerance in voltage measurement
Dependence on the quality of the ZMPT101B sensor
Limited scalability to large-scale applications

Q: Can the IoT-based voltage protection relay be integrated with other IoT devices?

A: Yes, the IoT-based voltage protection relay can be integrated with other IoT devices to create a smart grid system.

Q: What are the future scope and recommendations for the IoT-based voltage protection relay?

A: The future scope of the IoT-based voltage protection relay includes:

Integration with other IoT devices to create a smart grid system
Development of a more advanced algorithm for voltage protection
Implementation of this design in various industrial and domestic applications

The recommendations for the IoT-based voltage protection relay include:

Further research is needed to improve the accuracy and tolerance of the voltage measurement
The use of more advanced algorithms for voltage protection is recommended
The implementation of this design in various industrial and domestic applications is recommended

Q: What are the potential applications of the IoT-based voltage protection relay?

A: The potential applications of the IoT-based voltage protection relay include:

Industrial applications, such as manufacturing and processing
Domestic applications, such as residential and commercial buildings
Grid management and control systems

Q: How can the IoT-based voltage protection relay be implemented in real-world scenarios?

A: The IoT-based voltage protection relay can be implemented in real-world scenarios by:

Integrating the system with existing electrical infrastructure
Configuring the system to meet specific voltage protection requirements
Monitoring and analyzing the system's performance and making adjustments as needed

Conclusion