Types of discrete distributions

Oct 13, 2025 by thesweetdesigns.com 134 views

Introduction

Goodness-of-fit tests are statistical methods used to determine how well a given distribution fits a set of observed data. In this article, we will focus on goodness-of-fit tests for discrete distributions, which are distributions that can only take on distinct, separate values. Discrete distributions are commonly used to model the behavior of count data, such as the number of defects in a manufacturing process or the number of customers in a store.

What are discrete distributions?

Discrete distributions are a type of probability distribution that can only take on distinct, separate values. This is in contrast to continuous distributions, which can take on any value within a given range. Discrete distributions are often used to model the behavior of count data, which is data that can only take on whole numbers.

Types of discrete distributions

There are many types of discrete distributions, including:

Binomial distribution: This distribution models the number of successes in a fixed number of independent trials, where each trial has a constant probability of success.
Poisson distribution: This distribution models the number of events occurring in a fixed interval of time or space, where the events occur independently and at a constant average rate.
Geometric distribution: This distribution models the number of trials until the first success, where each trial has a constant probability of success.
Negative binomial distribution: This distribution models the number of trials until a specified number of successes, where each trial has a constant probability of success.

Goodness-of-fit tests for discrete distributions

Goodness-of-fit tests for discrete distributions are used to determine how well a given distribution fits a set of observed data. There are several types of goodness-of-fit tests that can be used for discrete distributions, including:

Chi-squared test: This test is used to determine how well a given distribution fits a set of observed data. It works by comparing the observed frequencies of each category to the expected frequencies under the given distribution.
Kolmogorov-Smirnov test: This test is used to determine how well a given distribution fits a set of observed data. It works by comparing the cumulative distribution function (CDF) of the given distribution to the CDF of the observed data.
Anderson-Darling test: This test is used to determine how well a given distribution fits a set of observed data. It works by comparing the CDF of the given distribution to the CDF of the observed data.

Cumulative Distribution Function (CDF)

The CDF of a distribution is a function that gives the probability that a random variable takes on a value less than or equal to a given value. The CDF is an important concept in statistics, as it can be used to determine the probability of a random variable taking on a value within a given range.

Discrete CDF

The discrete CDF is a function that gives the probability that a random variable takes on a value less than or equal to a given value. The discrete CDF is defined as:

F(x) = P(X ≤ x)

where F(x) is the CDF, P(X ≤ x) is the probability that the random variable X takes on a value less than or equal to x, and x is the given value.

Example of a discrete CDF

Suppose we have a random variable X that takes on the values 0, 1, 2, and 3 with probabilities 0.2, 0.3, 0.2, and 0.3, respectively. The discrete CDF of X is given by:

F(0) = 0.2 F(1) = 0.2 + 0.3 = 0.5 F(2) = 0.2 + 0.3 + 0.2 = 0.7 F(3) = 0.2 + 0.3 + 0.2 + 0.3 = 1.0

Goodness-of-fit test using the CDF

One way to perform a goodness-of-fit test using the CDF is to compare the CDF of the given distribution to the CDF of the observed data. This can be done using the Kolmogorov-Smirnov test or the Anderson-Darling test.

Example of a goodness-of-fit test using the CDF

Suppose we have a random variable X that takes on the values 0, 1, 2, and 3 with probabilities 0.2, 0.3, 0.2, and 0.3, respectively. We want to determine how well this distribution fits a set of observed data. We can use the Kolmogorov-Smirnov test to compare the CDF of the given distribution to the CDF of the observed data.

Matlab code for the goodness-of-fit test

Here is some Matlab code that performs a goodness-of-fit test using the CDF:

% Define the given distribution
p = [0.2, 0.3, 0.2, 0.3];

% Define the observed data
x = [0, 1, 2, 3];
y = [0.2, 0.3, 0.2, 0.3];

% Calculate the CDF of the given distribution
F = cumsum(p);

% Calculate the CDF of the observed data
F_obs = cumsum(y);

% Perform the Kolmogorov-Smirnov test
[d, p_value] = kstest2(F, F_obs);

% Print the results
fprintf('D-statistic: %f\n', d);
fprintf('p-value: %f\n', p_value);

Conclusion

Goodness-of-fit tests for discrete distributions are an important tool for determining how well a given distribution fits a set of observed data. The CDF is an important concept in statistics, as it can be used to determine the probability of a random variable taking on a value within a given range. The Kolmogorov-Smirnov test and the Anderson-Darling test are two common goodness-of-fit tests that can be used for discrete distributions. By using these tests, we can determine how well a given distribution fits a set of observed data and make informed decisions about the behavior of the data.

References

Kolmogorov, A. N. (1933). Sulla determinazione empirica di una legge di distribuzione. Giornale dell'Istituto Italiano degli Attuari, 4, 83-91.
Smirnov, N. V. (1948). Table for estimating the goodness of fit of empirical distributions. Annals of Mathematical Statistics, 19(2), 279-281.
Anderson, T. W., & Darling, D. A. (1952). Asymptotic theory of certain "goodness of fit" criteria based on stochastic processes. Annals of Mathematical Statistics, 23(2), 193-212.

Additional information

Q: What is a goodness-of-fit test?

A: A goodness-of-fit test is a statistical method used to determine how well a given distribution fits a set of observed data. It is used to test the hypothesis that the observed data follows a specific distribution.

Q: What types of distributions can be used for goodness-of-fit tests?

A: Goodness-of-fit tests can be used for a wide range of distributions, including discrete distributions such as the binomial, Poisson, geometric, and negative binomial distributions.

Q: What is the cumulative distribution function (CDF)?

A: The CDF is a function that gives the probability that a random variable takes on a value less than or equal to a given value. It is an important concept in statistics, as it can be used to determine the probability of a random variable taking on a value within a given range.

Q: How do I calculate the CDF of a discrete distribution?

A: The CDF of a discrete distribution can be calculated by summing the probabilities of each value in the distribution up to a given value. For example, if we have a discrete distribution with values 0, 1, 2, and 3 with probabilities 0.2, 0.3, 0.2, and 0.3, respectively, the CDF would be:

F(0) = 0.2 F(1) = 0.2 + 0.3 = 0.5 F(2) = 0.2 + 0.3 + 0.2 = 0.7 F(3) = 0.2 + 0.3 + 0.2 + 0.3 = 1.0

Q: What are some common goodness-of-fit tests?

A: Some common goodness-of-fit tests include the Chi-squared test, the Kolmogorov-Smirnov test, and the Anderson-Darling test.

Q: How do I perform a goodness-of-fit test using the CDF?

A: To perform a goodness-of-fit test using the CDF, you can compare the CDF of the given distribution to the CDF of the observed data. This can be done using the Kolmogorov-Smirnov test or the Anderson-Darling test.

Q: What is the D-statistic?

A: The D-statistic is a measure of the difference between the CDF of the given distribution and the CDF of the observed data. It is used in the Kolmogorov-Smirnov test to determine the significance of the difference.

Q: What is the p-value?

A: The p-value is the probability of observing a D-statistic as extreme or more extreme than the one observed, assuming that the null hypothesis is true. It is used to determine the significance of the difference between the CDF of the given distribution and the CDF of the observed data.

Q: How do I interpret the results of a goodness-of-fit test?

A: To interpret the results of a goodness-of-fit test, you need to consider the p-value and the D-statistic. If the p-value is less than a certain significance level (usually 0.05), you can reject the null hypothesis and conclude that the observed data does not follow the given distribution. If the p-value is greater than the significance level, you cannot reject the null hypothesis and conclude that the observed data may follow the given distribution.

Q: What are some common applications of goodness-of-fit tests?

A: Goodness-of-fit tests are commonly used in a wide range of applications, including:

Quality control: Goodness-of-fit tests can be used to determine whether a manufacturing process is producing products that follow a specific distribution.
Finance: Goodness-of-fit tests can be used to determine whether a financial model is accurately predicting stock prices or other financial metrics.
Biology: Goodness-of-fit tests can be used to determine whether a biological model is accurately predicting the behavior of a population or other biological metrics.

Q: How do I choose the right goodness-of-fit test for my data?

A: To choose the right goodness-of-fit test for your data, you need to consider the type of distribution you are testing and the characteristics of your data. Some common factors to consider include:

Type of distribution: Different goodness-of-fit tests are designed for different types of distributions. For example, the Chi-squared test is commonly used for discrete distributions, while the Kolmogorov-Smirnov test is commonly used for continuous distributions.
Sample size: The sample size of your data can affect the choice of goodness-of-fit test. For example, the Anderson-Darling test is commonly used for small sample sizes, while the Kolmogorov-Smirnov test is commonly used for larger sample sizes.
Data characteristics: The characteristics of your data can also affect the choice of goodness-of-fit test. For example, if your data is highly skewed or has outliers, you may want to use a goodness-of-fit test that is robust to these characteristics.

Q: What are some common pitfalls to avoid when performing a goodness-of-fit test?

A: Some common pitfalls to avoid when performing a goodness-of-fit test include:

Choosing the wrong goodness-of-fit test: Choosing a goodness-of-fit test that is not designed for your type of data or distribution can lead to incorrect conclusions.
Ignoring the assumptions of the test: Ignoring the assumptions of the test, such as the assumption of independence or the assumption of normality, can lead to incorrect conclusions.
Not considering the sample size: Not considering the sample size of your data can lead to incorrect conclusions, especially if the sample size is small.

Q: What are some common resources for learning more about goodness-of-fit tests?

A: Some common resources for learning more about goodness-of-fit tests include:

Textbooks: There are many textbooks available that cover goodness-of-fit tests, including "Statistical Analysis of Financial Data" by Robert F. Stambaugh and "Goodness-of-Fit Tests" by David A. Freedman.
Online courses: There are many online courses available that cover goodness-of-fit tests, including courses on Coursera, edX, and Udemy.
Research articles: There are many research articles available that cover goodness-of-fit tests, including articles in the Journal of the American Statistical Association and the Journal of Statistical Software.