European Corporate Policies and IP Blocking

Oct 13, 2025 by thesweetdesigns.com 90 views

Host Server Problem (IP Blocked by Firewall)

Introduction

When using the Green-API Custom Notifier in Home Assistant, you may encounter issues due to IP blocking by firewalls. This problem can arise when the IP address of your Home Assistant instance is blocked by a firewall, preventing it from sending or receiving notifications. In this article, we will explore the issue of IP blocking and provide a solution to modify the host server in the Green-API Custom Notifier.

Understanding the Problem

The error message you receive when trying to send notifications using the Green-API Custom Notifier is:

"Request was failed with error: HTTPSConnectionPool(host='api.green-api.com', port=443): Max retries exceeded with url: /waInstance7105202726/sendMessage/38afd2aa6fca450db8577f236e95b0cdf85411d696bc480a99 (Caused by ProtocolError('Connection aborted.', ConnectionResetError(104, 'Connection reset by peer')))."

This error message indicates that the connection to the Green-API server was reset by the peer, which is likely due to IP blocking by a firewall.

European Corporate Policies and IP Blocking

As you mentioned, European corporate policies may block IP addresses originating from Russia. This means that if your Home Assistant instance is located in Russia, it may not be possible to send or receive notifications using the Green-API Custom Notifier.

Solution: Using a Direct Host Server

Green-API kindly informed you that their servers are located in various countries, including Europe. To resolve the issue of IP blocking, you need to use the direct host of your server instead of the general host:

🔴 https://api.greenapi.com/ (which points to Moscow)

✅ https://xxxx.api.greenapi.com/ (where xxxx is your instance in GreenAPI)

Modifying the Host Server in the API.py File

The API.py file of the WhatsApp API client for Python is where the host server is likely saved. However, you are unable to access this file. To modify the host server, you will need to access the API.py file and update the host server URL.

Modifying the Host Server in the HA Notifier

Alternatively, you can modify the host server in the HA Notifier. To do this, you will need to access the HA Notifier settings and update the host server URL.

Adding the Host Server Field in the Config.yaml File

You would like to know if it is possible to add the host server field in the Config.yaml file under Instance ID and Token. Unfortunately, this is not possible. The host server URL is typically stored in the API.py file or the HA Notifier settings.

Solution: Modifying the Host Server in the HA Notifier

To modify the host server in the HA Notifier, follow these steps:

Access the HA Notifier settings by going to the Home Assistant dashboard and clicking on the "Configuration" tab.
Scroll down to the "Notifiers" section and click on the "Edit" button next to the Green-API Custom Notifier.
In the "Notifier Settings" section, click on the "Advanced" tab.
In the "Advanced Settings" section, click on the "Edit" button next to the "Host" field.
Update the host server URL to the direct host server URL provided by Green-API.
Click on the "Save" button to save the changes.

Conclusion

In conclusion, the issue of IP blocking by firewalls can be resolved by modifying the host server in the HA Notifier. By using the direct host server URL provided by Green-API, you can ensure that your Home Assistant instance can send and receive notifications without any issues. We hope this article has provided you with a clear understanding of the problem and a solution to resolve it.

Additional Information

If you are still experiencing issues with IP blocking, you may want to consider the following:

Check with your internet service provider to see if they are blocking any IP addresses.
Use a VPN to mask your IP address and avoid blocking.
Consider using a different notification service that does not rely on IP addresses.

Troubleshooting Tips

If you are still experiencing issues with the Green-API Custom Notifier, here are some troubleshooting tips to help you resolve the problem:

Check the error message to see if it provides any clues about the issue.
Verify that the host server URL is correct and up-to-date.
Check the API.py file to see if it contains any errors or issues.
Try restarting the Home Assistant instance to see if it resolves the issue.

FAQs

Here are some frequently asked questions about the Green-API Custom Notifier and IP blocking:

Q: Why is my IP address being blocked? A: Your IP address may be blocked due to European corporate policies or other reasons.
Q: How can I resolve the issue of IP blocking? A: You can modify the host server in the HA Notifier to use the direct host server URL provided by Green-API.
Q: Can I add the host server field in the Config.yaml file? A: Unfortunately, this is not possible. The host server URL is typically stored in the API.py file or the HA Notifier settings.
Host Server Problem (IP Blocked by Firewall) - Q&A

Introduction

In our previous article, we discussed the issue of IP blocking by firewalls and how to modify the host server in the HA Notifier to resolve the problem. In this article, we will provide a Q&A section to answer some of the most frequently asked questions about the Green-API Custom Notifier and IP blocking.

Q&A

Q: Why is my IP address being blocked?

A: Your IP address may be blocked due to European corporate policies or other reasons. This can prevent your Home Assistant instance from sending or receiving notifications.

Q: How can I resolve the issue of IP blocking?

A: You can modify the host server in the HA Notifier to use the direct host server URL provided by Green-API. This will ensure that your Home Assistant instance can send and receive notifications without any issues.

Q: Can I add the host server field in the Config.yaml file?

A: Unfortunately, this is not possible. The host server URL is typically stored in the API.py file or the HA Notifier settings.

Q: Why do I need to use a direct host server URL?

A: Using a direct host server URL ensures that your Home Assistant instance can connect to the Green-API server without any issues. This is especially important if your IP address is blocked by a firewall.

Q: How do I know which direct host server URL to use?

A: You can contact Green-API to obtain the direct host server URL for your instance. They will provide you with the correct URL to use.

Q: Can I use a VPN to resolve the issue of IP blocking?

A: Yes, you can use a VPN to mask your IP address and avoid blocking. However, this may not be a reliable solution and may require additional configuration.

Q: What are some troubleshooting tips for resolving the issue of IP blocking?

A: Here are some troubleshooting tips to help you resolve the issue of IP blocking:

Check the error message to see if it provides any clues about the issue.
Verify that the host server URL is correct and up-to-date.
Check the API.py file to see if it contains any errors or issues.
Try restarting the Home Assistant instance to see if it resolves the issue.

Q: Can I use a different notification service that does not rely on IP addresses?

A: Yes, you can use a different notification service that does not rely on IP addresses. However, this may require additional configuration and setup.

Q: How do I contact Green-API for support?

A: You can contact Green-API for support by visiting their website and submitting a support ticket. They will respond to your inquiry as soon as possible.

Conclusion

In conclusion, the issue of IP blocking by firewalls can be resolved by modifying the host server in the HA Notifier. By using the direct host server URL provided by Green-API, you can ensure that your Home Assistant instance can send and receive notifications without any issues. We hope this Q&A article has provided you with a clear understanding of the problem and a solution to resolve it.

Additional Resources

If you are still experiencing issues with IP blocking, you may want to consider the following additional resources:

Green-API documentation: This provides detailed information on how to use the Green-API Custom Notifier and resolve common issues.
Home Assistant documentation: This provides detailed information on how to use Home Assistant and resolve common issues.
Online forums and communities: These provide a platform for discussing common issues and seeking help from other users.

Troubleshooting Tips

If you are still experiencing issues with the Green-API Custom Notifier, here are some additional troubleshooting tips to help you resolve the problem:

Check the error message to see if it provides any clues about the issue.
Verify that the host server URL is correct and up-to-date.
Check the API.py file to see if it contains any errors or issues.
Try restarting the Home Assistant instance to see if it resolves the issue.

FAQs

Here are some frequently asked questions about the Green-API Custom Notifier and IP blocking:

Q: Why is my IP address being blocked? A: Your IP address may be blocked due to European corporate policies or other reasons.
Q: How can I resolve the issue of IP blocking? A: You can modify the host server in the HA Notifier to use the direct host server URL provided by Green-API.
Q: Can I add the host server field in the Config.yaml file? A: Unfortunately, this is not possible. The host server URL is typically stored in the API.py file or the HA Notifier settings.